When you create proxy media, Resolve makes new low-res files of your clips (often at 1/2, 1/4, or 1/8 resolution). These files are smaller and use simpler codecs, so the editor can play back and scrub footage in real time. Optimized Media is similar, except Resolve stores those pre-rendered files in its cache folder (tied to your project) rather than as separate sidecar files (grabfootage.com) (grabfootage.com). Proxies are portable (you can share or move them), making them ideal for collaborative workflows or mobile editing. Optimized media lives in Resolve’s cache, which is fine if you’re the only editor on one workstation (grabfootage.com) (grabfootage.com). In either case, when editing finishes your cuts and transitions apply to the full-quality clips. (Resolve will always render your final video from the original high-res footage, not the proxies.)
Configure Proxy/Optimized Media Settings
Before generating any proxy files, tell Resolve what size and format to use. In Project Settings (bottom-right gear icon, or File > Project Settings), go to Master Settings and scroll to the Optimized Media and Render Cache section (elements.tv) (device.report). Here you’ll find options for Proxy Media Resolution and Proxy Media Format. For example, you might choose Quarter or One-Eighth resolution so performance is very snappy (device.report). You can also pick a codec: H.264 or DNxHR LB usually give a good balance of file size and quality. After selecting your fields and hitting Save, Resolve will use these settings when creating proxies. (You can also do a similar step for Optimized Media here, choosing its resolution/codec.)
- Proxy Mode / Timeline Proxy: Resolve also has a quick on-the-fly option called Proxy Mode (or Timeline Proxy Mode) under the Playback menu. Setting Playback > Timeline Proxy Mode > Half or Quarter forces the timeline to use a lower resolution display without creating new files. This can improve effects performance with no extra steps, but it does not use proxy files – it simply downscales the playback. To use actual proxies, leave Timeline Proxy Mode at Off and proceed with generating proxy files.
Generating Proxy and Optimized Files
With settings saved, generate the actual low-res files for your heavy clips. In the Media Pool (or Edit page bin), select the clips you want to speed up. Right-click and choose Generate Proxy Media (device.report). Resolve will show a progress bar as it renders each clip to your chosen proxy resolution and format. You can continue working, but expect slightly slower performance until it’s done. Similarly, you can use Generate Optimized Media via right-click if you prefer Resolve’s internal cache method (device.report). (Proxies and optimized media serve the same purpose of smoother playback.) Once generation completes, you should see your clips marked as having proxies (in List view you can enable the “Proxy” column to verify (createdtech.com) (createdtech.com)).
- Proxy Storage: By default, Resolve writes proxy files into a
ProxyMediafolder on your cache drive, mirroring the folder path of the original clips (createdtech.com). You can change this location under Project Settings > Master Settings > Optimized Media and Render Cache > Cache Files Location if needed.
Activating and Using Proxies in the Timeline
After proxies exist, tell Resolve to use them during editing. In the Edit or Cut page, look in the top or in the Playback menu for Proxy Handling (in older versions this might be under Playback > Proxy Mode). Choose Prefer Proxies (device.report). This ensures Resolve will play the proxy files whenever they are available, falling back to the full-res originals if a proxy is missing. (If you just generated all proxies in Resolve and left them in place, you should always have them available.) You can also click the proxy icon in a viewer to switch between Original and Proxy modes.
-
To link proxies manually (for example, if someone else generated them or you moved the files), go to the Media Pool, select one or more clips, right-click and pick Link Proxy Media. Then navigate to the proxy file (or folder) you want Resolve to attach (device.report). After linking, choosing Prefer Proxies will use those files.
-
When Proxy Handling is set to Prefer Proxies, each proxy clip will play smoothly. If you switch to Disable All Proxies, Resolve forces use of the original media (and shows a warning if any offline media). There’s also Prefer Camera Originals which does the opposite (play original if present, else proxy). In short, pick Prefer Proxies for editing performance, and disable/turn off proxies for final work (device.report).
Editing with Proxies
With proxies active, you edit as usual. Cutting, trimming and rearranging clips are much faster because the CPU/GPU no longer needs to decode giant 4K/6K frames – instead it pulls the lightweight proxies. This means scrubbing and timeline playback become smooth. All your edits and effects are still being recorded in the timeline; you just see them in lower resolution form. For example, transiting from one clip to another or adjusting on-screen titles will reflect quickly on-screen when using proxies.
Keep in mind that proxies are lower quality previews. Simple corrections (like rough color tweaks) are fine, but detailed grading should wait. Before final grading or finishing, switch back to the original (high-res) media (www.tourboxtech.com). The edits you made – cuts, keyframes, transitions, installed Fusion titles – all transfer to the full-res clips. On the final pass with original footage, you’ll have the full detail to match with client expectations.
One nice side effect: if you got client feedback on edits, you can quickly make revisions on the fly with proxies and then confirm in full-res later. This speeds up revision cycles under deadline.
Switching Back to Full-Resolution Media
When it’s time to render the final video, toggle off proxies so Resolve uses your original footage. In Playback > Proxy Handling, change the setting to Disable All Proxies or Prefer Camera Originals (device.report). Now the timeline will show the true full-res frames rather than the blurrier low-res versions. In the Edit timeline you can double-check that the viewer resolution is full. If you used optimized media, also ensure Playback > Use Optimized Media if Available is unchecked (so that original clips are used instead).
On the Deliver page, double-check any performance options: under Advanced Settings or More Options, make sure “Use Optimized Media” (if present) is turned off so you export with original media. (With proxies, this is less critical, but good to verify.) Essentially, by disabling proxies and optimized media, you’ll be sure the rendered frames come straight from the original high-res source. In this state, export your timeline at the desired resolution; Resolve will process the full-quality footage, giving you a final video at full detail.
Managing Proxy/Optimized Files After Editing
Once your project is done and finalized, you can delete the temporary media to save disk space. Because proxy and optimized files are just generated duplicates, it’s safe to remove them. For proxy media, Resolve creates a ProxyMedia folder (often alongside your cache files) mirroring your original file paths. You can simply delete that folder on your hard drive to clear out all proxy clips (createdtech.com). Alternatively, in Resolve’s Media Pool you can select clips and use the Unlink Proxy Media or Delete Optimized/Proxy Media commands (depending on version) to clean up. Deleting optimized media works similarly by removing cache files from your scratch disk (device.report).
Deleting these files won’t affect your timeline – your edits will still refer to the original clips. Removing them frees up potentially large amounts of space, which is important after big projects. Just be aware: if you ever reopen the project and need to re-edit, you’d have to recreate proxies/optimized media if you want smooth playback again.
Common Issues & Fixes
-
Proxy menu options are unavailable: If you don’t see “Generate Proxy Media”, first try “Generate Optimized Media” instead – older Resolve versions may only have optimized media. Also ensure you’re on the Edit or Media page and have clips selected. If Resolve still won’t create proxies, check that you have enough free disk space and that your Cache/Proxy location is set correctly in Project Settings.
-
Playback still stutters: Make sure you actually enabled proxy use. In the Playback menu, turn on Prefer Proxies (device.report). If you used Timeline Proxy Mode (half or quarter), remember to set it back to Off when going to final render. Also ensure your proxy resolution is low enough; for very slow machines, try 1/8th resolution instead of 1/2.
-
Clips show as offline/purple bar: A purple line on the timeline means Resolve can’t find the original media (it’s using proxies only). If you see that unexpectedly, double-check your media paths or re-link the clips. If proxies aren’t needed, use Unlink Proxy Media on a clip (via right-click) to break the proxy connection and use the original file again.
-
Color grading looks wrong on proxies: This is normal – proxies don’t match full quality. The fix is to grade on the original clips. Exit Prefer Proxies mode so you’re viewing originals, and then adjust colors. The grades you made with proxies will move to the full-res clips automatically, but always double-check on the real footage.
-
Export looks low-res: This usually means proxies or optimized media were still active during the render. Before delivering, ensure Playback > Proxy Handling is set to Disable All Proxies and that any “Use Optimized Media” option in the Deliver page is off. Then re-export to get the full-resolution video.
-
Surface vendor differences: If you collaborate, remember that proxy media are stand-alone files. If someone else on the team has the project, you can copy your proxy folder over and use Link Proxy Media to point them, or have everyone generate proxies on their own machines. Optimized media (being path-specific) is not portable across systems.
VIDIO Shortcut
Once your cut is locked and you’ve exported the final project at full resolution, consider giving the video a quick quality boost with VIDIO’s AI tools. For example, run your exported video through VIDIO’s Video Upscaler to enhance detail and raise resolution (up to 4K) or through the Sharpener to intelligently detect and clarify edges. These tools work on your finished file, so they don’t interfere with editing at all. In just a few clicks, VIDIO can sharpen and up-res your output, maximizing image clarity as a final polish. This lets you get the most out of your fast proxy workflow without compromising on crisp, high-quality results.
